Bonjour & Bienvenue

Provence French Aprons

French Market Bags

Eiffel Tower Paris Aprons

French Country Home

Lunch Totes & Wine Bags

French Fabric Bags/Totes

SewAndKnit Boutique

Samples & Products

Provence French Fabric

Eiffel Tower Paris Fabrics

Lavender Flower Fabrics

Traditional Toile Fabrics

Wine & Vineyard Fabrics

Stablizers & Thread

Sewing Machine Needles by Schmetz

Anita Goodesign Collections

Anita's Embroidery Workshop Packets

Machine Knitting Instruction Books

Charted Knitting Graphs

FAQ & Sales Policies

Contact Us

About Us


 

Stabilier


Stitch N Wash

 

Water Soluble Tearaway Fusible Stabilizer For Machine Embroidery - Open Airy Designs on light cotton & linen - 12" x 10 yds - Stitch N Wash® This 1.5 oz tear away stabilizer is ideal for airy, open work type embroidery designs on light cottons and linen. It's unique because it is made up of half soluble and half non-soluble fibers. By wetting the design once it is complete the stabilizer is easily torn away without distorting stitches or harming the delicate fibers of heirloom quality fabrics. The design will retain the non-soluble part of the stabilizer throughout the life of the garment keeping the embroidery looking smooth. Any remnants of the stabilizer around the design will wash out in the laundry. This fusible version of Stitch N Wash® can be used on loosely woven fabrics that tend to shift during the hooping and embroidery process. By fusing the Stitch N Wash® on to the back of the fabric, it will aid in keeping the fabric taut. The fusible feature also eliminates the need for basting or messy spray adhesives. *Easy to remove from around delicate embroidery or machine stitching. *Won't shadow through light colored fabrics. *Eliminates countless hours of "picking" out stabilizer remnants. *Super stable and will support about 8,000 stitches if the design is well-digitized. Product Name : Stitch N Wash Fusible (FSWF1210) Size is Approximately: 12" x 10 yds How to use Stitch N Wash®: 1) Hoop one layer of the stabilizer within the frame with the garment or fabric. Be sure to use a piece at least one inch larger than the outer parameter of the embroidery frame. 2) Embroider the design. *Tip - If the design is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for designs size), float an additional layer of Floriani Stitch N Wash® between the hoop and the bed of the machine for each additional 8,000 stitches for added support! 3) Remove the hoop from the machine and from the garment. 4) Wet around the edge of the design using a sponge, foam paint brush or envelope sealer. Wait about 10 seconds to allow the water to activate the water soluble portion of the stabilizer. 5) Tear away as much of the Stitch N Wash® as possible. 6) Stabilizer remnants will wash out in the laundry with a mild detergent and agitation. Detailed Instructions are included inside the tube of the package. This product is also available in 8 ½" x 11" sheets for feeding through a printer for paper/foundation-piecing designs and templates. Please click here for information - https://www.etsy.com/listing/201268646

 

Tearaway

 

Tearaway Medium Stabilizer - Machine Embroidery Non Stretch Stabilizers - Stabilizes Towels, Robes for Monograms and Woven Fabric Medium Tearaway Stabilizer for Machine Embroidery and Decorative Stitches *Use to support embroidery designs on towels, denim or other "stable" woven fabrics. *Tears clean from around most embroidery designs. *Will support about 8,000 stitches on a well-digitized, average size design. *Use in conjunction with other stabilizers for added support. Floriani Medium Tearaway is manufactured using a unique process called the "Delta Wet Laid Non-Woven" technique. The benefit of using this method of production is that the product is very solid, when closely examined you will see no thick and/or thin spots. When used as an embroidery stabilizer, it is not necessary to use multiple layers in random directions to support stitches. Medium Tearaway is a 1.5 oz, clean tear stabilizer. It is the best choice for a supplement stabilizer when working on high stitch count designs in conjunction with your other stabilizers such as No Show Nylon Mesh, Heat N Sta® Tearaway or Wet N Stick®. It provides back up support without adding unwanted bulk. Available in two sizes: Please use the select an option drop down menu to choose your size. FTM1210: 12 inches wide x 10 yards FTM1510: 15 inches wide x 10 yards FTM 2010: 20 inches wide x 10 yards Color: White (Also available in black please see link below.) To use Floriani Medium Tearaway: 1) Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use. 2) Hoop the stabilizer to the wrong side of the fabric. 3) Place the embroidery frame on the machine; complete the layout and centering of the design. 4) If the design to be stitched is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! 5) Once the design is complete, remove the hoop and fabric from the machine. Tear away the stabilizer from around the design one layer at a time. Detailed instructions for use are included inside the tube.

 

Applique Wonder

 

Pressure Sensitive Fusible Webbing for Machine Embroidery Patches, Traditional Embroidered Patches or Quilt Appliqué - Appli-kay Wonder® Floriani Appli-kay Wonder is a specialized webbing material which is fusible on one side and sticky on the other! Use for traditional or machine embroidered appliqué to hold pieces in place while you stitch without gummy needles! Enjoy the soft and flexible texture of Appli-kay Wonder when layering pieces. The pressure sensitive side makes positioning small detailed pieces a snap! Also use to hold free standing embroideries or patches in place while you stitch. Roll is 9 inches x 3 yards. Please read the information label in photo #1 Detailed Instructions are inside the tube of the package. Please read the shop policies before purchase.

 

Cutaway

 

Cutaway Medium Stabilizer - Machine Embroidery - Stitch Stabilizers for Medium to Heavy Stitch Count Designs - Leather, Vinyl, Fleece, Polos Cutaway Medium Stabilizer is a very soft yet solid 2.0 oz stabilizer that will support medium to heavy stitch count designs. It is ideal for fabrics that are considered un-stable; fabrics such as fleece, t-shirts, sweatshirts, polo knit, leather, vinyl, etc. *Use on non-stable stretch fabrics. *Will support a design density of about 14,000 stitches and well digitized. *Super soft feel makes it ideal for sweatshirts, fleece and sweater knits. Roll is approximately: 12 inches wide x 10 yards. Color: White To use Floriani Medium Cutaway: 1) Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use. 2) Place the stabilizer to the wrong side of the fabric and hoop. 3) Place the embroidery frame on the machine and complete the design. Note! If the design is denser than 14,000 stitches or if it is a poorly digitized design (too many stitches for the designs size), float an additional layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 10,000 stitches for added support. 4) Once the design is complete, remove the hoop and garment from the machine and trim the stabilizer close to the design. This product is also available in a fusible version which eliminates the need for spray adhesives or basting. Please contact me for more information or click the link below.

 

No Show Mesh

 

Cutaway Beige Mesh Stabilizer - Machine Embroidery Stabilizers - No Show Mesh® Nylon Stabilizes Stretch Knits, Baby Garments, Quilts, Polos "No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market. It is invisible to the eye when viewed from the front! Roll of stabilizer is approximately: 12 inches wide x 10 yards long. Color: Beige Floriani No Show Nylon Mesh is a 1.5 oz sheer cutaway available. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The unique embossing pattern of this product makes it a staple in your embroidery stabilizers. Hoop the stabilizer to the back of the garment or fabric for soft flexible support for light fabrics and designs. *Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4"). *Will not shadow through on light weight cottons and knits when worn against the skin. *Perfect foundation for crazy patch quilting. *Ideal foundation for patches, emblems and free standing embroideries. To use Floriani No show Nylon Mesh: 1) Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use. 2) Hoop the stabilizer to the back of the garment. 3) Place the embroidery frame on to the machine. Complete the layout and centering of the design. 4) Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin. 5) After the design is complete, remove the garment from the machine and embroidery hoop. Trim the stabilizer as close to the design as possible. *Tip! If embroidering knit, don't forget to use topping! *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness. Detailed instructions for use are inside the tube of the package. This product is also available in White or Black. Please see the separate listings for these colors. This product is also available in a fusible version which eliminates the need for messy spray adhesives.

 

Topping

 

Water Soluble Stabilizer Topping - For Machine Embroidery & Decorative Stitches on High Pile, Terry Cloth, Textured Fabrics - Towels Water Soluble Topping for Machine Embroidery or Decorative Stitches when stitching on high pile or textured fabrics. Floriani Water Soluble Topping provides a smooth stitching surface for your machine. When the machine has to maneuver around loops and grooves in the fabric, it will affect your stitch quality. This product is completely water soluble and provides fantastic stability on the surface of your fabric by keeping your stitches elevated. *Use on high pile fabrics such as fleece, terry and towels *Use on textured fabrics such as corduroy, seer sucker, and velvet. *Use on knits and lycra/spandex. *Use to shield some fabrics from hoop burn *Once opened, keep Floriani Water Soluble Topping sealed in an airtight ziplock type bag or plastic container. How To use Floriani Water Soluble Topping: 1) Place the stabilized garment in the hoop and secure the hoop on the machine. Complete the centering and alignment of the design. 2) Cut a piece of Floriani Topping slightly larger than the size of the design and place it on top of the fabric. 3) Secure the Topping to the surface of the garment with scotch tape or by moistening the corners slightly and then sticking it down to the garment or the inside edges of the hoop. 4) Complete the embroidery. 5) Tear away as much of the topping as possible. Remove any remnants by moistening with a damp cloth, Q-Tip or steam from an iron. *Tip - If your embroidery design is a satin stitch type embroidery and/or doesn't have an outline, use a wet Q-Tip to go around the edge of the design before tearing any of the Topping away. This will prevent any distortion of the stitching. Available in two lengths! Just choose your length from the Select a Size drop down menu and then click Add to Cart. FTOP 1010 - 10” x 10 yds FTOP 1025 - 10” x 25 yds

 

Fusible No Show Mesh

 

Fusible Cutaway Mesh Stabilizer - Machine Embroidery Stabilizers for Quilting Knits Polos Stretch Fabric - No Show Mesh® Nylon "No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market. This is the temporary fusible version to prevent fabric from shifting or distorting during the embroidery and hooping process. This fusible version eliminates the need for messy spray adhesives. Roll of stabilizer is approximately: 20 inches wide x 10 yards long. Color: White Floriani No Show Nylon Mesh is a 1.5 oz sheer cutaway available. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The unique embossing pattern of this product makes it a staple in your embroidery stabilizers. Hoop the stabilizer to the back of the garment or fabric for soft flexible support for light fabrics and designs. *Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4"). *Will not shadow through on light weight cottons and knits when worn against the skin. *Perfect foundation for crazy patch quilting. *Ideal foundation for patches, emblems and free standing embroideries. To use Floriani No show Nylon Mesh: 1) Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use. 2) Hoop the stabilizer to the back of the garment. 3) Place the embroidery frame on to the machine. Complete the layout and centering of the design. 4) Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin. 5) After the design is complete, remove the garment from the machine and embroidery hoop. Trim the stabilizer as close to the design as possible. *Tip! If embroidering knit, don't forget to use topping! *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness. Detailed instructions for use are inside the tube of the package. FMFWH2010 This product is also available in Beige or White in a separate listing of my shop. Please click here for all the stabilizer listings - https://www.etsy.com/shop/ChezDarlene?section_id=15509338

 

Perfect Stick

 

Tearaway Sticky Stabilizer - Machine Embroidery Stabilizers - Hard to Hoop Items or Fabric - Napkins, Collars, Towels, Socks, Ultra-Suede With Perfect Stick® embroidery in almost any area is achievable! Enjoy quality stitching with no residue build up or gummy needles. Perfect Stick® is ideal for hard to hoop items such as bulky towels, backpacks, collars, napkin corners, or socks. Use for fabrics that can be damaged by the hooping process (Hoop Burn); like leather, velvet, ultra‐suede and satin. With Perfect Stick® you will enjoy the stability of a firm yet flexible stabilizer that will support all types of embroideries on most fabrics. Roll of Tearaway stabilizer is 12" x 10 yards. Color: White Please read the additional information from the label in photo #3. To use Floriani Perfect Stick® Tearaway: 1) Place one piece of Floriani Perfect Stick® in the embroidery frame with the paper side facing up. 2) Draw an “X” on the surface of the paper with a straight pin taking care to not puncture the stabilizer. This will perforate the paper so that it can be torn away to expose the sticky surface of the stabilizer within the hoop. 3) Stick down the item/garment to be embroidered and smooth out any wrinkles. 4) Stitch your design! 5) Remove the stabilizer by gently tearing it away from around the design. If the design does not have an outline (this perforates the stabilizer), place your thumb on the edge of the stitching to protect it while pulling away the stabilizer. **Tip ‐ Floriani Perfect Stick® is built on our 1.5 oz tearaway stabilizer foundation. This will support a design around 4" x 4" in size with a stitch count of 10,000 or less. If your design is larger or overly dense for its size you will need to add more stability. Use one or two layers of Floriani Medium Tearaway as a "floater" under the hoop. There is no need to baste or use spray adhesive to hold these layers under the hoop, they will simply be caught in the stitching under the fabric and will give the design the fibers it needs to lay smooth in the fabric. Please click here to see all the stabilizers in my shop - https://www.etsy.com/shop/ChezDarlene?section_id=15509338 Floriani Perfect Stick® FPS1210 - Detailed instructions are inside the tube.

 

[ First ] [ Prev ] [ Next ] [ Last ]